MagHPL Ferrous Writeable Panels – are high-pressure laminated sheets that provide an engineered smooth dry-erase surface with a ferrous layer to enable all magnets to work on the surface.

MagHPL Ferrous Panels are available in plain as well as contemporary colours and are created to work with magnets, pens, chalks and projectors.  Use good quality dry-erase Markers or Chalk/Chalk Pens and clean with Whiteboard Spray and microfibre cloth.

The Colour Range:

- Gloss White 
- Matt White 
- Gloss Light Grey
- Brushed Alu Cross 
- Gloss Apple Green 
- Matt Green Chalkboard
- Matt Black Chalkboard
- Matt Smokey Blue Chalkboard
- Matt Stone Grey Chalkboard
- Matt Macchiato Chalkboard
- Matt Wine Red Chalkboard
- Matt Apple Green Chalkboard
- Matt Curry Chalkboard
- Matt White (Projectable)
- Matt Light Grey (Projectable) 


Magnet receptivity rating 5/5 - this is the highest receptive rating, all magnets will work on the surface as if you were using a fridge door.

To trim MagHPL panels use a Stanley knife to make several cuts along a straight edge and snap for a clean straight cut, or tin snips for shaped cuts. To fix MagHPL to wall or panels use a silicon, tile or contact adhesive and follow manufacturer instructions. 

To finish the look, check out WriteTrims decorative trims. Pens, Cleaners and Microfibre Cloths may all be found in Accessories.

Panels are delivered within 7 days. For other Countries see Cart.

SKU Ref: MGF893

Please Note: Due to the bulky nature of panels, this product does not include Free UK Delivery - call or email to get the best delivery rate.

Benefits

• Smooth engineered hard-wearing surface
• High ferrous content for use with ALL magnet types
• Fast and easy installation
• Adheres to any smooth surface with floor tile adhesive
• Can be fixed to uneven surfaces such as brick or tile walls
• Safe to use
• Easy-clean surface
• Extremely smooth writing experience
• Easy to handle
• Resistant to fire
• 5-year warranty

Product Details

• SKU: MGF893
• Surface: 0.5mm laminate free of formaldehyde in accordance with DIN EN 717-1
• Base Material: 0.5mm iron foil
• Thickness: 1.3mm
• Panel dims: 122cm W x 244cm L & 122cm W x 305cm L
• Boxed weight: 10kgs
• Receptivity: 5/5


MagHPL Panels should be used in well-ventilated rooms. Drying of the surface in too dry a room, either air conditions or direct heat influence, should be avoided (risk of cracking). A short-term temperature influence on the laminate up to 60C is possible.

These boards use an iron foil (not iron powder) and therefore, have strong magnet-receptivity. 

All surfaces are protected with a removable film. It is recommended to clean the surface after having removed the protective film or before using the board for the first time in order to remove possible residues of the film. For this thorough cleaning a conventional spirit (ethyl alcohol) can be used.

Never use detergents such as washing-up liquids to clean the surface because they usually contain fatty substances for the skin. A greasy film can remain on the surface making it extremely difficult to clean the surface with a dry cloth thereafter.

NOTE: Boards should always be transported flat to avoid folds and cracks in the surface.

MagHPL recommended technical cutting tools: Cold-Tip-Cutting Say Blade AGEFA (German manufacturer)10890301 - Carbide tipped - Dry Cut

Diameter (mm)                               305

Thickness of corpus (mm)              2,2

Thickness in area of teeth (mm)    1,8

Number of teeth                             60

Speed (U/min)                            1500

Forward feed (m/min)                      8

 

Measurements

METRIC

• Panel dims:  122cm W x 244cm L & 122cm W x 305cm L
• Boxed weight: 10kgs & 14kgs

IMPERIAL

• Panel dims: 48.03 ins W x  96.06in L & 48.03in W x 120.08in L
• Boxed weight: 22.05 lbs & 30.86 lbs

Delivery & Returns

DELIVERY

• Standard: 7 DAYS

RETURNS

• Rights: 30 day return policy
• Warehouse: MagScapes Returns, c/o Horizon International Cargo, Unit 14, 5 Mills Road, Aylesford, Kent, ME20 7NA