is currently backordered. You may still purchase it now but it won't ship until it becomes available again.
MagHPL Ferrous Writeable Panels – are high-pressure laminated sheets that provide an engineered smooth dry-erase surface with a ferrous layer to enable all magnets to work on the surface.
The Colour Range:
- Gloss White Grid
- Matt Black Chalkboard
- Gloss White
- Matt White Dry-Erase
- Gloss Light Grey
- Matt Green Chalkboard
- Matt White (Projectable)
- Matt Light Grey (Projectable)
- Gloss Mango
- Brushed Alu Cross
- Gloss Apple Green
- Gloss Maui
Magnet receptivity rating 5/5 - this is the highest receptive rating, all magnets will work on the surface as if you were using a fridge door.
SKU Ref: MGF893
Please Note: This product does not include Free UK Delivery - call or email to get the best delivery rate.
- Smooth engineered hard wearing surface
- High ferrous content for use with all magnet types
- Fast and easy installation
- Adheres to any smooth surface with floor tile adhesive
- Can be fixed to uneven surfaces such as brick or tile walls
- Safe to use
- Easy-clean surface
- Extremely smooth writing experience
- Easy to handle
- Resistant to fire
- Works with all types of magnets
- 12 months warranty
- Meeting Areas
- Sports Halls
- Workstations and partitions
TechnicalSurface: 0.5mm laminate free of formaldehyde in
accordance with DIN EN 717-1
- Base: 0.5mm iron foil
- Panel dims: 122cm x 244cm
- Gross weights: 10kgs
- Receptivity rating 5/5
These boards use an iron foil (not iron powder) and therefore, have strong magnet-receptivity.
All surfaces are protected with a removable film. It is recommended to clean the surface after having removed the protective film or before using the board for the first time in order to remove possible residues of the film. For this thorough cleaning a conventional spirit (ethyl alcohol) can be used.
Never use detergents such as washing-up liquids to clean the surface because they usually contain fatty substances for the skin. A greasy film can remain on the surface making it extremely difficulty to clean the surface with a dry cloth thereafter.
NOTE: Boards should always be transported flat to avoid folds and cracks in the surface.
Cold-Tip-Cutting Say Blade AGEFA (German manufacturer)10890301 - Carbide tipped - Dry Cut
Diameter (mm) 305
Thickness of corpus (mm) 2,2
Thickness in area of teeth (mm) 1,8
Number of teeth 60
Speed (U/min) 1500
Forward feed (m/min) 8
122cm (48ins) x 224cm (88ins)